Factory made Puukko knife blades from legendary Laurin Metalli in Finland Zone Hardened series.
Lauri Zone Hardened series have a special heat treatment compared to the normal blades. Whereas normally the whole blade gets hot and quenched, these only the edge gets heated before quench. The result is a staggering 63HRC ad the edge, but the blade is kept from being brittle with a much softer 55HRC spine. Pictured the normal Lauri 95, closeups for comparison incoming.
The Lauri 95 is the most popular Puukko knife blade model, the bread and butter of puukko knife blades. Lengths around 90-100mm are often the Jack of all Trades in medium size knives and for good reason. A large blade can do everything a small blade can, except being light to carry and being less wasteful on materials. Knives evolved with the people that carried them, and the environment of course plays a large factor. Most climates do not require constantly chopping through thick undergrowth so priority on other aspects were adopted. Material was scarce in the old days, and a stick tang configuration knife in this length made sense. Being the tool of choice for the Nordic hunter gatherer society for thousands of years, no one can honestly question the reliability of a good carbon steel Puukko blade.
All Lauri carbon steel blades are made in tough as nails 80CrV2 steel. This steel is a high carbon tool steel by Thyssenkrupp which is technically designated as a spring steel. The black sides on the carbon steel blades are a result of hardening in an open oven. With this technique, a blend of burned oil and other materials are fused with the steel and acts as rust protection. While being very resistant, it will scratch and eventually wear off with time and heavy use. This will leave the blade with a unique patina only a carbon steel knife blade can get.
Lauri blades are made by stock removal from a stamped blank. Knife blades from Laurin Metalli is by far the most used knife blades in the Finnish Puukko industry. No matter if the blade is designed for a small souvenir knife or a workhorse chopping Leuku, blades from Lauri are all meant for use. Carbon steel knife blades HRC: approx. 58, stainless knife blades HRC: approx. 57
All Lauri blades except for the 10-5111 Blank are hardened, sharpened and ready for a handle.
Blade width: 20mm
Blade thickness: 3,2mm
Total length: 202mm
Steel: 80CrV2 Carbon steel
Shipping & Returns and Refunds
Shipping prices starting at:
We ship worldwide from our facilities in Bennäs, Finland. The shipping prices depends on the chosen service, your location and the weight of the package. Here you will see starting prices for each area. All prices are already subsidized by us to the customers advantage.
|Zones||Countries||Price starting at|
|Zone1||Denmark, Estonia, Germany, Latvia, Lithuania,||7,90€|
|Zone2||Austria, Belgium, Czechia (Czech Republic), Luxembourg, Netherlands, Poland, Sweden||9,90€|
|Zone3||Canada, France, Norway, United States||12,90€|
|Zone4||Bulgaria, Croatia, Greece, Hungary, Ireland, Italy, Portugal, Romania, Slovakia, Slovenia, Spain, UK, Vatican City||13,90€|
|Zone5||Cyprus, Georgia, Malta||19,90€|
|Zone7||Iceland, Liechtenstein, Monaco, Switzerland, Albania, Bosnia & Herzegovina, Serbia, Ukraine||24,90€|
|Zone9||Afghanistan, African Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Benin, Bhutan, Bolivia, Botswana, Brazil, Brunei, Burkina Faso, Burundi, Cambodia, Cameroon, Chad, Chile, China, Colombia, Comoros, Congo, Costa Rica, Côte d'Ivoire, Cuba, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Ethiopia, Fiji, Gabon, Gambia, Ghana, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, India, Indonesia, Iran, Iraq, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Lesotho, Liberia, Libya, Madagascar, Malawi, Malaysia, Maldives, Mali, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Mongoli, Montenegro, Morocco, Mozambique, Myanmar, Namibia, Nauru, Nepal, New Zealand, Nicaragua, Niger, Nigeria, North Macedonia, Oman, Pakistan, Palau, Palestine, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Qatar, Republic, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, Saudi Arabia, Senegal, Seychelles, Singapore, Somalia, South Africa, South Korea, Sri Lanka, Sudan, Suriname, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, United Arab Emirates, Uruguay, Uzbekistan, Vanuatu, Venezuela, Verde, Vietnam, Yemen, Zambia, Zimbabwe||29,90€|
Covid-19 shipping restrictions
Please note that during the Covid-19 pandemic, nationwide lock-downs can affect shipping companies if they can transport to that country or not. These decisions are made on each countrys level, and we cannot know beforehand if this happens. If it does, we will try to find an alternate shipping solution, and if none is found You will of-course get a full refund.
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return. If you wish to change the item(s) to something else or cancel the order, please contact us at email@example.com for assistance.
If the item is defective in any way, please contact us and we will find a solution.
For normal returns, please note that we cannot accept the return shipping costs. If there is something wrong with the item we will naturally discuss the matter and solve the situation.
Sadly damages during transport is all too common and normally shipping companies do not take responsibility in a quick manner, if at all. Please inspect your order upon reception and contact us immediately if there is something wrong. We will strive to find a solution that is workable for both parties.
Handmade and natural items
Many items are handmade and thus the measurements and shapes can vary somewhat from stated. Other items such as wood blocks are natural, and the actual product photo will not be displayed on the site, but rather a selection of our own stock photos of what to expect. We try our best to comply with the average of the specific item. If you have special needs for sizes and patterns for your project, please contact us before ordering.
We will refund the purchase in the same method you made the payment originally. If you want refunds in another form, please contact us beforehand to find out added costs.
In case of product returns we will refund the customer within 5 working days from item received and accepted. If there are any issues with the returned items we will contact the customer and discuss agreeable possibilities.